Follow Us x
Arc Elite Entry-Level Welding Course
$1,575 if you pay in full (10% off)
The basics needed for an entry-level job: 30 hours on your choice of MIG, TIG, Stick or Flux-Core, covering the 1F, 2F and 3F positions, with one certification test attempt included.
The essentials, fast
Arc Elite is a 30-hour program built around the basics employers expect at the entry level. You choose one process — MIG, TIG, Stick or Flux-Core — and train in the flat, horizontal and vertical fillet positions.
One certification test attempt is included in your tuition, a $400 value. The Arc Elite test is on 3/16-inch plate in 1F, 2F and 3F. No experience is required. Every program starts with the fundamentals.
The positions you will train in
- 1F — fillet welds in the flat position
- 2F — fillet welds in the horizontal position
- 3F — fillet welds in the vertical position
What is included and what to bring
- Included in tuition: practice materials, consumables, booth time and hands-on instruction.
- Bring your own safety gear (PPE). We recommend a welding helmet, welding gloves, a welding jacket, safety glasses and a respirator.
Step up to Arc Elite Plus
Arc Elite Plus is 60 hours and adds the overhead fillet (4F) and the vertical and overhead groove positions (3G and 4G), with two certification test attempts included.
Pay in full
10% off the $1,750 tuition when you pay upfront.
Monthly with Affirm
Split tuition into monthly payments, subject to Affirm approval.
In-house financing
Want a payment plan directly with us? Call (702) 824-0457.
Straight answers
Which process should I pick?
Choose MIG, TIG, Stick or Flux-Core when you enroll. Our team will confirm your choice with you after you sign up.
Do I need any experience to start?
No. Most students walk in having never struck an arc. Every program starts with the fundamentals before moving to certification-level work.
What are the payment options?
Pay in full and save 10% ($175 off), or finance monthly through Affirm, subject to approval. For an in-house payment plan, call (702) 824-0457.
What do I need to bring?
Practice materials, consumables and booth time are included. Students supply their own safety gear (PPE). We recommend a welding helmet, welding gloves, a welding jacket, safety glasses and a respirator.
What if I do not pass my certification test?
Retesting is available. The student retest fee is $300 per retest.
Ready to start?
